Ways to improve the service life of rice hulling rubber rollers and precautions in use

3. Methods to improve the service life of rice hulling rubber rollers and precautions in use:

Chapter 4 The correct use of rice hulling rubber rollers

The shelling process of cereal grains generally goes through three basic steps: squeezing, rubbing and tearing, and peeling. Among them, rubbing and tearing are the key to peeling. The size of rubbing and tearing depends on two important factors: one is the friction, and the friction The size depends on the pressure between the two rollers; the second is the length of the relative action time of this reverse friction force on the grain, and the length of this action time depends on the relative speed of the two rollers, which is related to the difference in linear velocity. . It is not difficult to see that the pressure between the rollers and the linear speed difference are important process parameters for rice hulling. The correct selection of it not only directly affects the hulling rate, but also affects the consumption of rubber rollers.

Chapter Three Inspection Standards of Grain Hustle Cots

Enterprise standards: ministerial standards and foreign standards Corporate standards: general corporate standards are higher than ministerial standards Requirements for physical and mechanical properties of rubber:

Chapter 2 The basic characteristics and performance of the rice hulling rubber roller

At present, there are three types of rice hulling rubber rollers in my country and internationally, which are also called three series, respectively named: wheel type, sleeve type, and build type. Wheel type: Positioning by the center flange hole, 3 or 4 bolt holes are fixed on the two main shafts of the hulling machine.

Chapter One Introduction to Rice Husking Cots

Since the rubber roller hulling machine replaced the sand plate hulling machine and the iron roller rice milling machine, it became the special equipment for rice hulling in the rice milling industry. With its large output, high hulling rate, low rice breaking rate, and power It is widely used by rice processing plants because of its advantages of low consumption and convenient operation.

The characteristics and technical parameters of rice hulling rubber rollers and matters needing attention in use

Since the rubber roller hulling machine replaced the sand plate hulling machine and the iron roller rice milling machine, it became the special equipment for rice hulling in the rice milling industry. With its large output, high hulling rate, low rice breaking rate, and power It is widely used by rice processing plants because of its advantages of low consumption and convenient operation.